Introduction:

Video Ground Loop Isolator could reduce "Ground Loop Interference" with CCTV signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials, differences in ground potentials are typically caused by unbalanced power line loads.

Features:

BNC male to BNC female with mini cable 15 on both sides.

Passive, no power required.

Hi Performance to eliminate ground loop problem.

Low video loss, Bandwidth: 20hz -11Mhz ,+0/-3Db

Prevents video-signal distortion caused by video ground loops.

Eliminates picture tearing, cross talk and rolling.

Prevents power cables laid by others interfering with the CCTV system.

Tech Info:

Model NO.			VT-430AH
Specs			Hi-Performance Video Ground Loop Isolator
Insertion Loss			<0.5dB
Bandwidth			20Hz -11MHz, +0/-3dB
Input Resistance			75 ohm
Output Resistance			75 ohm
Ground loop rejection			>90dB @>50Hz
Isolation Voltage			600VDC (Min)
Insulation Resistance			100m Ohm
Transient Voltage Suppressors			12 Vrms
Dimensions (mm):			28x26.5x73 with 15cmx2 cable
Material			ABS Black